Electricians Fault Finding Bible (UK Version)
Try FREE For 7 Days (7 Day Money Back Guarantee)
One Time Purchase. No Subscriptions
Designed For Electricians
Save Crucial Time On Fault Finding Jobs
Whats Inside
- Safety First — Before You Start
- Electrical Fundamentals Quick Reference
- Master Diagnostic Flowchart
- No Power / Dead Circuit
- Tripping MCBs, RCBOs & Blown Fuses
- RCD & RCBO Faults
- Sockets & Outlets
- Lighting Faults
- Motor, Appliance & Battery Storage Faults
- Voltage & Power Quality Issues
- Step-by-Step Testing Methods
- Fault Tracing Procedures
- Interpreting Test Results
- Test Equipment Quick Reference
- BS 7671 & IET Guidance Notes Reference
Step-by-Step Procedures
- No power diagnostic sequence (6 steps)
- MCB/fuse fault finding (7 steps)
- RCD fault finding (7 steps)
- Socket fault finding (6 steps)
- Lighting fault finding (6 steps)
- Motor/appliance fault finding (6 steps)
- Power quality investigation (5 steps)
- Continuity testing R1+R2 (5 steps)
- Insulation resistance testing (5 steps)
- Earth fault loop impedance Zs (4 steps)
- RCD verification (4 steps)
- Tracing an open circuit (5 steps)
- Tracing an earth fault (4 steps)
- Tracing a short circuit (4 steps)
Fault Reference Tables
- No power / dead circuit
- MCB / fuse faults
- RCD faults
- Socket & outlet faults
- Lighting faults
- Motor & appliance faults
- Power quality faults
Reference Tables
- Ohm's Law & power formulas
- UK voltage standards
- Wire colour codes
- Zs maximum values (Type B, C & D MCBs)
- IR reading interpretation
- R1+R2 typical values by cable size
- Test equipment guide with specs and costs
- BS 7671 regulation quick reference (15 regulations/sections)
Callout Boxes & Notices
- Legal disclaimer
Who Is This For?
This Guide is Only For Qualified And Approved Electricians In The United Kingdom.
How It Works
Once you purchase, you’ll get instant access to the Fault Finding Guide, designed specifically for electricians working in the field across the UK. You can use it on your phone, tablet, or printed out on the job.
Our Guarantee
We stand behind this guide and the value it delivers in the field. Try it on real jobs and put it into practice on your next fault-finding call-outs. If you go through the system and don’t feel it helps you diagnose issues faster and with more confidence, we’ll give you a full refund within 7 days of purchase. This is a practical tool built for working electricians, so it’s only fair that it proves itself on the job.
Stop guessing. Start diagnosing.
Every electrician has been there — standing in front of a fault with a customer watching, time ticking, and no clear starting point. This guide changes that. Perfect for approved electricians who just want a reliable reference on the van, the UK Electrician's Fault Finding Bible gives you a clear, confident process for finding and fixing electrical faults fast.
No waffle. No textbook theory. Just practical, structured diagnostic flowcharts, fault tables, and step-by-step testing procedures built the way electricians actually think — symptom first, cause second, fix third.
What's inside:
Step-by-step diagnostic flowcharts, fault tables covering the most common electrical problems, and quick-reference technical guidance — all in one professionally formatted PDF you can save to your phone, tablet, or laptop and pull up anywhere on the job.
From a dead socket to a nuisance-tripping RCD, from a flickering LED circuit to a lost neutral, every major fault type is covered with a clear process to follow, written for real-world site conditions, not a classroom. This edition also includes modern system fault guidance covering renewable energy systems, smart installations, electronic protection devices, and mixed-load circuits commonly found in today's installations.
This guide goes beyond basic fault tables. It includes detailed step-by-step testing methods covering continuity, insulation resistance, loop impedance, and protective device verification — each with the correct sequence, expected behaviour, and what to do when results are outside normal expectations.
A dedicated fault tracing section walks through how to systematically locate open circuits, earth faults, and short circuits using proven isolation and midpoint diagnostic methods. A test result interpretation section explains what readings actually mean in practice — from high insulation resistance values through to low-resistance fault conditions, loop impedance behaviour under fault, and protective device operation characteristics.
What's covered:
Safety & isolation procedures · Ohm's Law quick reference · Master diagnostic flowchart · No power & dead circuits · Tripping MCBs, RCBOs & other protective devices · RCD & RCBO faults including modern electronic devices · Socket & outlet issues · Lighting faults · Motor, appliance & energy system diagnosis · Voltage & power quality problems including neutral loading and imbalance issues · Step-by-step testing methods: continuity, insulation resistance, loop impedance & RCD verification · Fault tracing procedures: open circuits, earth faults & short circuits · Test result interpretation: insulation resistance ranges, loop behaviour, continuity values & RCD performance expectations · Test equipment guidance for safe and effective fault finding across modern installations.
Who is it for?
This Guide is for Electricians only. This is not for homeowners or people wanting to do DIY work
If you work in the UK — domestic, commercial, or light industrial — this guide will save you time on every job it's used on. At this price, it pays for itself the first time you use it.
Instant digital download. Works on any device. Use it on site from day one.
Terms And Conditions
Intended Audience and Purpose
This guide is published by Tradesman's Mate and is intended solely as a reference tool for use by individuals who are competent, qualified, or otherwise authorised to perform electrical work under applicable United Kingdom laws, regulations, and standards. This includes qualified electricians, approved contractors, and electrical apprentices working under appropriate supervision.
No Warranty / "As Is" Basis
This guide is provided "as is" and "as available" without any express or implied warranties of any kind. This includes, but is not limited to, warranties of accuracy, completeness, reliability, or fitness for any particular purpose. While reasonable efforts have been made to ensure accuracy, no guarantee is given that the information is free from errors or omissions.
Not a Substitute for Professional Advice or Compliance with Regulations
This guide does not constitute professional electrical engineering advice, legal advice, or confirmation that any work carried out in reliance on it will comply with applicable laws, regulations, or standards, including but not limited to the Electricity at Work Regulations 1989 and BS 7671 (IET Wiring Regulations).
It is the sole responsibility of the person performing or supervising any electrical work to ensure, before commencing work, that they comply with all applicable requirements, including but not limited to:
(1) BS 7671 and any current amendments;
(2) Electricity at Work Regulations 1989;
(3) Building Regulations (including Part P where applicable);
(4) local authority requirements and notification obligations; and
(5) any relevant health and safety legislation and workplace procedures.
Where there is any conflict between this guide, applicable legislation, regulations, standards, or manufacturer instructions, the applicable legal requirements and manufacturer instructions shall take precedence.
Notification, Inspection, and Compliance Requirements
In the United Kingdom, certain electrical work is notifiable under Building Regulations and may require certification and inspection by a registered competent person scheme or approval from local building control. Failure to comply with applicable notification and compliance requirements may result in enforcement action, requirement to rectify or remove work, insurance implications, and liability under civil or criminal law.
Electrical Testing and Procedures
Electrical testing is an essential part of fault finding, verification, and safety assessment of electrical installations and equipment. The procedures in this guide are intended to promote a structured and safety-focused approach using appropriate test instruments and accepted industry practice.
All testing must be carried out using correctly rated, maintained, and functional test equipment, and in accordance with manufacturer instructions and relevant standards. Test results must be interpreted alongside visual inspection, circuit design, installation conditions, and professional judgement. No single test result should be relied upon in isolation when assessing safety or suitability for service.
Any examples, illustrations, procedures, values, or diagnostic methods contained in this guide are provided for general reference only and may not be suitable for all installations, fault conditions, or environments.
Where any uncertainty exists regarding test results or the condition of an installation, further investigation must be carried out before energising or returning equipment to service.
Apprentices and Supervision
Electrical apprentices must only carry out work within the scope of their training, competence, and authorisation, and must always work under the level of supervision required by their employer, training provider, and applicable legislation and workplace procedures.
Apprentices are responsible for following all safety procedures, using appropriate personal protective equipment, and ensuring they do not undertake work beyond their level of authorisation or supervision. Where any uncertainty exists, work must stop immediately and guidance must be obtained from the supervising electrician before proceeding.
Assumption of Risk
Electrical work involves inherent hazards including electric shock, arc flash, fire, equipment damage, and property loss. By using this guide, the user acknowledges these risks and accepts full responsibility for all actions, decisions, and work carried out in reliance on the information provided.
Limitation of Liability
To the fullest extent permitted by law, Tradesman's Mate, its owners, directors, employees, contractors, and agents disclaim all liability for any injury, death, property damage, financial loss, loss of profit, business interruption, regulatory penalties, loss of insurance coverage, or any other direct or indirect loss arising out of or in connection with the use of this guide.
In all circumstances, Tradesman's Mate's maximum aggregate liability shall not exceed the amount paid by the purchaser for this guide.
Intellectual Property and Permitted Use
This guide is the intellectual property of Tradesman's Mate. All rights are reserved. A non-exclusive, non-transferable licence is granted for personal or professional reference use only. This guide may not be reproduced, distributed, resold, uploaded, or used to create derivative works without prior written permission.
Governing Law
This disclaimer and any disputes arising from use of this guide shall be governed by the laws of England and Wales, unless otherwise required by mandatory local jurisdiction.
FIND A QUALIFIED ELECTRICIAN
(e.g. NICEIC / NAPIT / SELECT or other recognised schemes)